Struder RW2和BN！

madcatmk2

请教各位，这二者如何取舍呢？BN听大家意思，强度不如A2，却比A2贵一倍，不合算啊！RW2只有4英寸刃，似乎太短了？另外RW2有没有带夹子的鞘？

madcatmk2

各位，谁给说说啊？
RW系列是ST跟别人合作搞的？
我看到有个RW3，原来是把柴刀的样子，要900美圆，哈哈！

日立

上图大家就说了！可以了，都300分了！！！

[ 本帖最后由 日立 于 2008-10-21 18:00 编辑 ]

madcatmk2

问题是我好象不可以上图？

panrongj0718

奇怪了
楼主居然还不能上图
请教斑竹是不是因为系统的延迟
还是因为别的原因呢？

xyxdml

因为楼主自己不清楚!

anti-jilex

楼主你真的需要好好研究一下，RW2和A2根本就不是一个概念。
一个是粗用工具，另一个是花瓶军刀。

给大家一个官方介绍吧：
Model RW-2

Price: $350.00

    * .250" Rogue Warrior Tanto Profile S30V Blade
    * Ranger Green G10 Handle
    * Kydex Sheath with Blade Tech Tek Lok Clip
    * 8.625" OAL
    * 4" Blade
    * 10.6oz

ORIGIN:

While attending the 2006 SHOT Show, Strider Knives was fortunate enough to share some space with Commander Richard Marcinko, The Rogue Warrior.

We had already met years before and were pleased to be asked, by the Commander and his organization, to contribute knife designs for a soon to be released video game production.

It was in the Las Vegas Convention Center, at the end of the day, when we met with the Commander and two of his associates to put pencil to paper. With a few questions answered by the Commander and his team, we had a design that was very functional, tactical, and simple by design, with the overkill of construction that Team Strider has built its reputation upon. The two pieces originally discussed are the Commanders vision of the evolution of two previous Strider designs.

With one fixed blade and one folding design, the fundamental concept of the two is the same. It is based on the fact that current conflict is predominantly urban. In urban conflict, edged tool applications can include much more prying and other abusive tasks than the field craft skills of the open desert or jungle environments of past conflicts. Because of this, we have engineered a very angular construction, with a calculated primary grind height providing an aggressive tip with the best of both strength and penetration.

Materials are forefront. Manufacturing is based on the desired outcome, not on cycle time or the least machining operations. Heat treat is a calculated combination of the best recipe and equipment available at any price. This is quality.

Commander Marcinko, The Rogue Warrior, joins forces with Team Strider Knives. Stand by for future endeavors...in the near future.

另外，他附带卡鞘，A2我记得是皮鞘，这方面A2比较好。
至于价钱，没差那么多啊，如果你觉得RW短，你就EBLT或者CPT-T吧，也就三百多块，和RW差不了几块钱。
强度的话，我觉得A2绝对没RW高，VG10夹钢在测试中可是脱落过哦，而且还是比A2强度高的A1做的测试。
P.S: Strider 不是 “Struder”，楼主拼错了。

这里分享一个小故事，我曾经和Albertnaoko一同去砍树，他拿着他的ATS-34的EB-LT[比RW多一个指槽，几乎一样的东西]，我趁Jasonp回国，偷拿他的A2。
我们两个人砍树，削皮，精细切割等干了很多事[不过大部分是狗腿干的]，他的EB-LT没任何变化，而A2刚砍了几刀就狼狈不堪了。当然，他没有损伤，但是很脏，谁让他是镜面抛光啊。
结果回家我又是洗又是上油的，而EB-LT就掸掸灰尘，擦一下油就好了。

P.S.又P.S.曾幾何時，PJ慫恿我買RW2來著，他說：“背齒多好看，上面還開了一個槽……”呵呵，差點把他忘了。

贴两张照片：
一个是RW2,一个是CPT-T,一个是EB-LT SS.

[ 本帖最后由 anti-jilex 于 2008-10-21 23:05 编辑 ]

ID-007

Struder 也有BN.....
LZ是问什么BN?

ID-007

RW2有带夹子的K鞘

madcatmk2

anti-jilex或者别的高手，谁用过BN呢？RW2anti-jilex说是花瓶，我也觉得有点，跟RW1差起来也就半英寸。
另外问下各位，RW1的柄强度能媲美AR、GB吗？一边只有G10，虽然我知道那玩意早期是防弹用的。谁实际把玩过的给说说啊？

madcatmk2

RW3看起来跟我解放军的71式砍刀一个样，要900美圆。我看到71不过100来块？
我也知道评论折刀柄有点无聊，那个强度只有在撬东西时候才能表现，那时候轴首先就破坏了。

jasonp

原帖由 madcatmk2 于 2008-10-22 06:25 发表
anti-jilex或者别的高手，谁用过BN呢？RW2anti-jilex说是花瓶，我也觉得有点，跟RW1差起来也就半英寸。
另外问下各位，RW1的柄强度能媲美AR、GB吗？一边只有G10，虽然我知道那玩意早期是防弹用的。谁实际把玩过的 ...

我相信世界上还没有把AR/GB或者RW1的手柄用坏的人......这该怎么比较
还有jilex好像没说RW2是花瓶

madcatmk2

他说是花瓶军刀哦！回我PM吧？

anti-jilex

我的確沒說RW2是花瓶，我說A2是花瓶。這不是很明顯嗎？雖然我也很喜歡A2,但是不敢用它來干什麽。
手柄用壞？你用它擋火車嗎？
另外，BN就和其他ST中大型直刀一樣啊，有什麽特別嗎？這個我還真不知道，PJ和Albert來幫忙解釋一下。

[ 本帖最后由 anti-jilex 于 2008-10-21 23:02 编辑 ]

anti-jilex

原帖由 madcatmk2 于 2008-10-21 02:10 发表
我看到有个RW3，原来是把柴刀的样子，要900美圆，哈哈！

RW3你看到的是Dwyer手工版的吧？XM001买了，现在Blue Line Gear还剩一把XM002的。
这不就是Ranbo的那个嘛，我觉得根本不需要考虑，买他就是浪费钱。个人认为它是铁片，不知道是什么钢材。

[ 本帖最后由 anti-jilex 于 2008-10-21 23:21 编辑 ]