[膜拜]羽毛纹大马打造教程

734315 · 发表于 2010-1-27 02:49

来源：http://www.britishblades.com/forums/content.php?58-Feathered-W-s-%28how-i-do-it%29

A brief pictorial...

first up is to make some w's, this is a stack of eleven layers of 15n20 and C20

weld it up then turn it through 90deg(has been forged out a little)

drawn out to twelve inches by about 3/8-1/2" thick

sectioned out into four bits ready for the first stack

said stack ready for welding

all welded up - now just got to do this all over another three times

after all that stacking and welding the billet is sectioned into six

and stacked up ready for welding

billet all welded up - this is our W's made

a quick etch to show what a compressed stack of w's look like(only ground with angle grinder sorry)

billet all cleaned up - VERY important to keep a reference of whereeverything is at All times as it is so easy to mess everything up allthe way to the end of the process

handle has been moved to the side and our Precious billet of w's hasbeen hacked into nearly two with a very blunt cutter(about 4mm thick atcutting edge)

handle moved again then welded it back up into one block again (makesure you do EVERYTHING at welding temperature) i diddnt have it hotenough when closing up the two sides and started to open up a weld -managed to stop it and weld it back up, but best to do it right firsttime!

the billet has been drawn out to 7 1/2" long by 3/8" thick by 1 1/2"wide, and is now cooling on the forge floor, will give it a bit of agrind and a quick etch tomorow to see if we have destroyed a perfectelygood billet of W's

A few pic's of the billet from the last pic now etched -

the billet is still a bit compressed and will spread out a bit yet whenit is drawn out, but it is an example of a feather pattern now allthats left to do is to make it into something sharp

A finished knife (not from this billet but one similar)

thanks for looking

dongyi2200 · 发表于 2010-1-27 03:09

好漂亮.口水一地

殺氣 · 发表于 2010-1-27 09:15

我草，这JB玩意儿真是好看的一B啊，怎么办啊，又中毒了，唉，谁来救救我啊

blazelu · 发表于 2010-1-27 09:18

真漂亮啊,毒物

blueswang · 发表于 2010-1-27 09:24

这个真的是膜拜了！

sky8015 · 发表于 2010-1-27 09:58

跟着膜拜！！！！漂亮啊

张爱汉 · 发表于 2010-1-27 15:15

漂亮

珍贵岁月 · 发表于 2010-1-27 15:46

我又中毒了

相思有用 · 发表于 2010-1-27 16:56

非常好看，看似很简单，可惜没有铁匠铺找机会试试！

断界 · 发表于 2010-1-27 17:57

提示: 作者被禁止或删除内容自动屏蔽

导演 · 发表于 2010-1-27 18:17

不可思议

SerialThriller · 发表于 2010-1-27 18:37

确实漂亮

dgl · 发表于 2010-1-28 10:12

漂亮,但是感觉配合双刃就更好了

如意钓叟 · 发表于 2010-1-28 12:30

厉害

huzi · 发表于 2010-1-28 12:35

绝对不舍得用

观赏的好东西

飞刀小生 · 发表于 2010-1-28 15:53

好东西呀！
我也想自己做一块！不知道都需要那些设备！

SEAL · 发表于 2010-1-28 15:57

同样膜拜

极度梦想 · 发表于 2010-1-28 21:57

神人。不得不膜拜了。

色酒鬼 · 发表于 2010-1-30 17:48

用羽毛纹做一把匕首肯定非常漂亮，，，，，

影子11 · 发表于 2010-1-31 22:20

太漂亮了

断界断界积分 38 注册时间 2008-4-15 参与分技术分精华该用户从未签到	发表于 2010-1-27 17:57 \| 显示全部楼层提示: 作者被禁止或删除内容自动屏蔽
断界断界积分 38 注册时间 2008-4-15 参与分技术分精华该用户从未签到
	回复支持反对举报

[材料数据] [膜拜]羽毛纹大马打造教程

评分

http://www.xhpaper.net.cn/

http://www.rzdsb.cn/

http://www.xhpaper.net.cn/

http://www.jyyes.cn/